• Accuracy: < 0.1% F.S. • Excitation Voltage: 5 - 15 V DC • Full-Scale Deflection: < 0.3 mm • Selectable Range: 0.1 - 20 kN • Technology: Silicon Piezoresistive • Housing: Stainless Steel
- 304 stainless steel monolithic housing - Amplitude-frequency response up to 10,000 Hz - 10,000g shock resistance on any axis - Selectable measurement range: ±50g to ±500g - MEMS variable capacitance technology - Lightweight: 15g
Accuracy: ±0.02% span over the temperature range Response Time: 300 milliseconds or less Long-term Stability: ±100 ppm FS/year Measurement Range: 0-20 MPa (selectable) Sensing Technology: Silicon resonant sensor Overpressure Tolerance: 1.5 times the full-scale pressure
The V2 series is a high-density and high-reliability large-scale interconnection solution connection system. The structural components are ITA connectors (plug side) and ICA connectors (receiving side), and 2 signal module connectors can be installed, thus 480 signal channels are supported at most. It is a high-density test and measurement connector of a kind, which is appropriate for test environments that are space-limited and have a small number of I/O channels. To ensure that the mating cycle is more than 20,000 times, the crank connecting rod locking structure is used.
The F1 handheld connector is a 160P multi-pin connector. It can be installed with one module and support 160 signal points. The connector supports I/O mixed-channel modules. The modules can be replaced according to different types of signals. A replaceable module connector is a kind of F1 series handheld connector that is suitable for small-sized connection requirements and provides a miniaturized connection solution.
The M1 Automatic Mating Connector is the means by which one installation of an F-Series Module is facilitated. Besides being variably compatible with mixed I/O connector signal integration, it acts as a high-density connector and has a total capacity of 160 connection channels (160P) at most.
