• Accuracy: < 0.1% F.S. • Excitation Voltage: 5 - 15 V DC • Full-Scale Deflection: < 0.3 mm • Selectable Range: 0.1 - 20 kN • Technology: Silicon Piezoresistive • Housing: Stainless Steel
- 304 stainless steel monolithic housing - Amplitude-frequency response up to 10,000 Hz - 10,000g shock resistance on any axis - Selectable measurement range: ±50g to ±500g - MEMS variable capacitance technology - Lightweight: 15g
Accuracy: ±0.02% span over the temperature range Response Time: 300 milliseconds or less Long-term Stability: ±100 ppm FS/year Measurement Range: 0-20 MPa (selectable) Sensing Technology: Silicon resonant sensor Overpressure Tolerance: 1.5 times the full-scale pressure
J599E6 series beam expansion type multimode and single-mode optical fiber connectors Main parameters
Product Parameters
| Mechanical Properties | Mechanical Life | 2000 mating cycles |
| Shock | Peak acceleration 2940m/s², duration 3ms, Rate of change of velocity 5.61m/s | |
| Vibration | 10Hz~2000Hz, power spectral density 0.2G²/Hz, RMS acceleration 16.4G | |
| Tensile Strength | ≥68N (2mm contact jumper) | |
| Environmental Performance | Temperature Range | -55℃-+125℃ (according to the optical cable temperature) |
| Salt spray: | K class: 500h F class: 48h W class: 500h MW class: 192h (acidic atmosphere) | |
| Airtightness (suitable for airtight adapter sockets) | Gas leakage rate ≤1x10⁻⁹Pa.m³/s, pressure difference between inside and outside is 1 atmospheric pressure | |
| Optical Performance | Insertion Loss | ≤0.6dB @850nm；≤0.8dB @1310nm |
| Return Loss | ≥20dB @850nm；≥45dB @1310nm |
J599E6 series beam expansion type high-density optical fiber connector Product features
1. The technology can be utilized in systems such as an aircraft, electronic systems, ships, and weapons. Where the installation space is small the system is suitable. It embodies a rotary quick-lock for accomplishing multi-channel optical communication.
2. The external casing of the J599E6 series of beam-expanding high-speed optical fiber connectors can be constructed of various materials and have different coatings to be conditioned for any environment.
3. Five-key positioning, with functions of blind insertion and error-proof insertion;
4. Bayonet structure, quick connection;
5. The contact parts of the J599E6 series of beam expansion type high-density optical fiber connectors are made of collimating lenses, with non-contact connection, and the end faces do not damage easily.
About Us
FAQ
Q1: What is the function of the "five-key positioning" design of the J599E6 series connectors?
A1: The five-key locating design is basically the two core ideas. To begin with, it allows blind insertion meaning that connection can be done without exact alignment thus it is good for situations where there is little space for installation. The other one is to get anti-misconnection protection in order to avoid the breaking of the unit or the connectors by the wrong connection of the ports.
Q2: How is "contactless connection" achieved and what are its advantages?
A2: Non-contact connection can be done by the installation of a collimating lens on the contact piece - the light beam is collimated by the lens and then sent, thus it is not necessary to come in direct contact with the end face of the contact piece. The benefits are in: ① End face wear or scratches are avoided thus the life of the contacting parts is prolonged; ② The light spot that is emitted is large and the device is not sensitive to dust, thus the signal loss caused by dirt is less.
Q3: What are the insertion loss and return loss of this series of connectors at different wavelengths?
A3: The optical performance parameters are dependent on the wavelength: ① Insertion loss: ≤0.6dB at 850nm wavelength, ≤0.8dB at 1310nm wavelength; ② Return loss: ≥20dB at a wavelength of 850nm and ≥45dB at a wavelength of 1310nm.
